products

Spring Energized Seals

Installation—for installation in open grooves

Installation—for installation in open grooves

Installationfor installation in open grooves Assembly of rod seal in open groove. Sealing lips in mounting direction. Values for lead-in chamfer: see table below. All edges rounded. We recommend: Rmin...

We are here to solve your problems professionally
Contact Now

Contact
  • Installation—for installation in open grooves
  • Installation—for installation in open grooves
  • Installation—for installation in open grooves
  • Installation—for installation in open grooves
Installation—for installation in open grooves



Assembly of rod seal in open groove.
Sealing lips in mounting direction.
Values for lead-in chamfer:
see table below.
All edges rounded.
We recommend: Rmin = 0.5mm

Assembly of rod seal in open groove.
Back of the seal in mounting direction.
All edges rounded.
We recommend: Rmin = 1mm



Assembly of piston seal in open groove.
Sealing lips in mounting direction.
Values for lead-in chamfer:
see table below. All edges rounded.
We recommend: Rmin = 0.5mm

Assembly of piston seal in open groove.
Back of the seal in mounting direction
All edges rounded.
We recommend: Rmin = 1mm

HiperSeal can fit AS 568A glands(or other standard O-ring groove) Without any modification
 
HiperSeal Can replace O-ring , and match DIN 3771, ISO 3601, AS 568, BS 1806 standard.

 

Feedback

You can fill out the form below to send your contact information and product demand submitted to us. We will solve as soon as possible! Thank you! To be able to contact you promptly and make sure you complete the full contact and demand information

  • *
  • *
  • *
  • *
  • *

Feedback