products

Lapping and testing machine

Lapping Machine 18lnch-3R/VS

Lapping Machine 18lnch-3R/VS

https://www.youtube.com/watch?v=CAn_-elDG28feature=youtu.be 1) Three conditioning rings 2) 18inch machine maximum lap dimension : 130mm ring 3)Variable Speed with control system 4) New design directly...

We are here to solve your problems professionally
Contact Now

Contact
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS
  • Lapping Machine 18lnch-3R/VS
 
 
 
2) 18inch machine maximum lap dimension :  130mm ring 
 
3) Variable Speed  with control  system
·       
4)  New design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.

5) Compact Electrical and power panel with all switches, digital process timer, and digital rpm indicator。



Brief description:
Only manufacturer to design and provide a rigid Spindle Housing, hardened spindle with heavy duty bearings lubricated for life.
 The geared motor is attached to the bottom of the Spindle housing. The spindle shaft enters the gearbox and is firmly attached and secure.
The entire axial load from the top including the weight of lap plate, rings, dead weights/pneumatic pressure and all are taken up by the center plate and the bearings directly.
This design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.
Standard Features:
- Power supply & Frequency can be customized.
- Bonfiglioli geared motor with an output of max 70 rpm, lubricated for life.
- 1 Hp, Telemecanique Variable Frequency drive to give stepless speed up to 70 rpm. ( Now as a standard feature).
- Slurry tray, with wiper, outlet pipe into the slurry tank directly kept inside the machine.
- Slurry pump, slurry divider, slurry flow regulator and outlet pipe on to the lap plate in case of abrasive lapping.
- Compact Electrical and power panel with all switches, digital process timer, VFD unit, etc.
-Complete powder coated and ready for startup.
Standard Toolings: 
- 1 no of Graded cast iron lap plate of diameter 465 mm approx.
- 3 nos of geared conditioning rings with id 170 mm.
- 3 nos of dead weights.
- 3 nos of felt pads.
- conditioning rings of height 70 mm approx with combo outer design, half plain and half geared for reversal.
- 3 nos of nylon side guide rollers.
- 1 no of Central Roller drum with gear for ring reversal.
Optional accessory :
-Pneumatic Lifting System for lifting dead weights
-Other lapping plate options: Copper plate, Compounded plate, Ceramic Plate.
Remark:
Standard machine is equipped with cast iron lapping plate and not including pneumatic lifting system. Call our sales for prices of various plate options and pneumatic lifting system.
Weight & Dimensions:
GROSS WEIGHT – 300 KGS APPROX
DIMENSIONS L 122 x W 94 x H 112 CMS APPROX  

Feedback

You can fill out the form below to send your contact information and product demand submitted to us. We will solve as soon as possible! Thank you! To be able to contact you promptly and make sure you complete the full contact and demand information

  • *
  • *
  • *
  • *
  • *

Feedback